Buy Carrier / Bryant Draft Inducer Motor 318984753, 318984-753, HC21ZE117 (Mars 10704)Carrier / Bryant Draft Inducer Motor 318984753, 318984-753, HC21ZE117 (Mars 10704) Product Description:
Product Description
CARRIER HC21ZE117, HC660-005, HC21ZE117B, 310371-752, 318984-753, HC15ZN 012, HC21ZE115 EMERSON 3109, JAKEL J238-150-037751, J238-150220, Packard 65569, ROTOM FB-RFB212, RFB212 DRAFT INDUCER MOTOR
H.P. 25MHP
VOLTS: 115
RPM : 3300
AMPS: 1.80
SPEEDS: 1
ROTATION: CW
ROTATION IS DETERMINED BY VIEWING END OPPOSITE THE LEADS
SHAFT DIMENSIONS (IN) 1 X 5/16 X 1 7/8
LENGTH LESS SHAFT (IN) 3 3/8
TYPE: SHADED POLE
BEARINGS: BALL
FRAME: C FRAME
INCLUDES SPECIAL LEADS AND PLUG
1 1/2 STACK
SINGLE PHASE
HERTZ: 60
OVERLOAD: AUTOMATIC
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
Saved a BUNCH of cash!!
By S. D. Curtis
I could hardly believe the price quoted for the motor and inducer wheel, which I purchased together. I have a Bryant/Carrier 395BAWC furnace, circa 1987, and the inducer motor was starting to go.In short, I couldn't be happier with this product and seller. I saved a ton of money by not calling a service technician, or purchasing the entire inducer housing unit, which costs about $300.My furnace is about 15 years old, and had original equipment. Removing the old unit was a piece of cake, though I needed to cut the old blower wheel off with a hack saw, as the allen wrench would not budge it. Even with that, replacing the motor and blower wheel was a snap... The motor comes with two wiring harnesses, one of which was for my furnace.The new motor is much quieter than the old one, and I've had it installed for about a month now, and have no complaints. I am not a handyman, electrician or HVAC guy, and this was a snap... From start to finish we're talking 45 minutes to an hour.Highly recommended, 5 stars.
2 of 2 people found the following review helpful.saved $500
By Bp
was quoted $600 to replace this motor by ARS and ordered and installed myself for 100. Will never overpay ARS again
0 of 0 people found the following review helpful.Works great, easy to put it in
By Derrill Perrier
I put this into my carrier furnace and it works great. Has been running in a Canadian prairie winter for 4 months now and not a problem. Make sure you order the gaskets and I advise you order the squirrel-cage fan too. My fan was seized and I had to cut the shaft on the old motor to remove the old motor from the mounting shield.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
